In this project, I will build a four-legged tortoise robot that can be controlled using Bluetooth from the ground up. The robot has two degrees of freedom and uses a crawling method to move, so it may not work properly on uneven ground.
.jpg)
The first step: 3D printing components
Some of the robot's body is made using 3D printing technology. I have provided .stl files and .ipt files for these 3D printing parts. You can modify these files according to your needs. The documents you need to print include a base plate, a cover plate, 3 front and rear connectors, a front panel, 4 leg connectors, 4 leg folding members, a rear panel, 4 side and base connectors, and 2 side panels. 4 upper members.
XRX using the advanced technology and equipment , manufacturing the best quality fiber connector for all our customers, It is a kind of insert an extraction connector based on the single core plug and adaptor, which both ends of optical cable have the connector plugs, according to the joint can be classified to type SC,FC,LC,ST,MU,MPO,MTRJ,E2000,and so on ,according to difference of the end face have the type PC,UPC,APC and so on. SC stands for Subscriber Connector- a general purpose push/pull style connector. It is a square, snap-in connector latches with a simple push-pull motion and is keyed.
SC Patch Cord,SC SC Patch Cord,SC Fiber Patch Cable,SC Fiber Cable
Chengdu Xinruixin Optical Communication Technology Co.,Ltd , https://www.xrxoptic.com