First , the pulse electronic fence introduction:
Types of electronic fences: pulsed electronic fence systems, pulsed high voltage power grid systems, fences for pastures, etc.
The pulse electronic fence consists of four parts: the first part: the front of the fence (support rod, alloy wire and warning sign). The second part: the fence mainframe is the core component of the system, and has the functions of alarm upper bar.
Control subsystem: control keyboard and computer software, can effectively control and manage the fence system
Communication and linkage subsystem: network converter, bus linker, bus address module, is an effective communication layer in the internal subsystem of the system
The linkage subsystem can output or input the alarm signal between different perimeter defense systems, so that multiple protection systems can form a complete security defense system.
Second , the implementation plan is determined
Determine the number of zones, length, zone location, and determine the angle of front-end installation
Third , the front support rod assembly
1. Assembly of the terminal rod
Aluminum alloy terminal rod, rain hat, composite terminal insulator, stainless steel universal base, insulator screw, base fixing screw
Tool: Phillips screwdriver
Splicing volume round, 1 at the top, 3 at the bottom, minimum 50MMM, maximum 200MM, mid-end mao, latest 22.5 degrees, M6*45 outward screw, fixed at the mid-end
2. Middle rod assembly: aluminum alloy intermediate rod, rain hat, middle rod insulator, stainless steel universal base, insulator screw, base fixing screw
Method with the middle end rod
Fourth , support rod fixing and front-end related accessories installation
Terminal rod position determination: straight line: 50-100 m / root, corner: angle is less than 120 degrees / root, partition: partition point / root;
The position of the middle rod is determined: straight line: 4-5 m/root; corner: angle is greater than 120 degrees/root
The wall is usually punched with a percussion drill and the support rod is fixed by screws. The screw size is M10*100MM and M8*80MM.
The role of the alloy wire: the alloy wire is a bare wire that constitutes the "tangible" perimeter and is loaded with pulsed high voltage. It is one of the most obvious accessories for the "high pressure deterrent" on the front fence.
Core advantages of the electronic fence host and system:
1. Multi-point control capability (original multi-level control authority)
2. Abnormal alarms such as short circuit, disconnection, tampering and communication failure
3. Control distance is unlimited, (network communication can be cross-provincial, cross-country control)
4. There is no limit to the number of zones, and there is no pressure in the later zones;
5. Use the bus address module to centrally manage other switches
6. Use the bus address module to centrally manage other switch alarm signals
electric bike charger,ebike charger,Sweeper charger,charger for vacuum cleaner
FOSHAN SHUNDE KELICHENG POWER SUPPLY TECHNOLGY. CO,LTD , https://www.kelicpower.com